CBM.1R & CBS.1R
Folding Bulk Mesh Pallet & Folding Bulk Sheet Pallet with half drop front & back gates
Folding pallet offering bulk storage and visual product identification. Four folded, equals one built up. Sides are not removable, therefore cannot be lost. Can also be made with a lockable security lid pallets are interstackable.
Product video
Specifications
Design Specifications
Stillage Assembly
- Ends: Pull each of the two folding sides to their fully open positions. If the two ends are not fully open, then erecting the gates becomes difficult.
- Gates: Hold onto the top of one gate and lift all the way to its upward limit. Locate bottom half gate hooks into bottom catches on each post. Then locate the top half gate hooks into the top catches on each post.
- Check Assembly: When assembly is complete, double check all posts to make sure all gate hooks are located fully. Visually check entire pallet to make sure it is in safe usable condition.
Stillage Safety Assessment
Before using any stillage, the operator must check that:
- Pallet feet are not bent or broken
- Gates fully locate into their catches
- Rack runners are in safe usable condition
- Stillage ends are properly attached to the stillage base
- Nuts & bolts are all tight
- Posts are not damaged and that stillage can be stacked or stacked onto
General Loading & Trucking of Stillage
- Always evenly distribute the loading of product into the stillage as best as possible
- When stacking stillages, make sure the stillage has interlocked properly before removing the forklift
- Avoid having heavy loads on top of the stack
- When erect CBM.1R & CBS1R stillages must be loaded long ways across the truck. Ropes or straps must then pass over the top if the stillage at each end. Stillage gates are not designed to be used as the tie down point
Stillage Damage & Repairs
- Damaged stillages should be assessed and if deemed to be unsafe, removed from circulation
- Any time a stillage is removed from circulation, it should be reported to the relevant supervisor
- Damaged or unsafe stillages are to be returned to Cevol Industries for proper assessment or repair
Operators Guide
Operators are not to exceed any of the design specifications listed above.
Each stillage hired out by Cevol Industries is in a safe usable condition, stenciled with the maximum capacity and stacking height.
Operators are to report any damaged stillage to their supervisor for assessment or return to Cevol Industries.
OFFICES
Melbourne Victoria (HQ)
229- 231 Governor Rd,
Braeside,Victoria - 3195 Australia
P: 1800 643 911
E: salesvic@cevol.com.au
Contact: Phil Nish - 0408 958 935
Sydney NSW
56-58 Power St,
St Marys, NSW - 2760 Australia.
P: 1800 643 911
E: salesnsw@cevol.com.au
Contact: Jodie Brown - 0407 839 775
Brisbane QLD
37-43 MacBarry Place,
Rocklea, Qld - 4106 Australia.
P: 1800 643 911
E: salesqld@cevol.com.au
Contact: Quinton Thrussell - 0448 448 099
Perth WA
5 Hanwell Way,
Bassendean, WA - 6054, Australia.
P: 1800 643 911
E: saleswa@cevol.com.au
Contact: Jodie Brown - 0407 839 775
