Home >Pallet Range >Folding Pallets >Bulk Open Steel Pallet with folding end posts




Bulk Open Steel Pallet with folding end posts

Bulk open pallet with folding end posts. Suitable for storage of product in rolls, tubes & bulker bags

Useful for easing warehousing problems.

Designed to fully utilise legal space on tray trucks.

Goods in rolls may overlap the base depending on the strength of the roll.

Product Manual
Frequently Asked Questions?
Base Dimensions
2200 x 1061
Usable Space
2200 x 980
Outside Feet
2292 x 1158
Overall Height
Inside Height
Folded Height
Under Base
Cubic Capacity
Approx. Mass
Design Specifications
Rated Capacity (NATA) Certified
1000 kg per unit
Stacking Fully Loaded
4 high, static flat
Forking Fully Loaded
1 high from any side
Trucking Fully Loaded
1 high

Stillage Assembly

  • Ends Assembly: Pull each of the two folding ends to their fully open position
  • Ends Folding: Push post keeper up until it clears the shroud.  Lower end down to base.  Dropping the end repeatedly will damage the stillage and is an OH&S risk to the operators
  • Check Assembly: Make sure each post keeper locates fully over the shroud.  Pulling the end back and forth will help the post keeper to locate firmly.

Stillage Safety Assessment

Before using any stillage, the operator must check that:

  • Pallet feet are not bent or broken
  • Rack runners are in safe usable condition
  • Stillage base is in good condition
  • Posts are not damaged and that stillage can be stacked or stacked onto
  • Post keepers locate firmly

General Loading & Trucking of Stillage

  • Always evenly distribute the loading of product into the stillage as best as possible
  • When stacking stillages, make sure the stillage has interlocked properly before removing the forklift
  • Avoid having heavy loads on top of the stack
  • Open ended stillage - recommend securing product to stillage before transporting

Stillage Damage & Repairs

  • Damaged stillages should be assessed and if deemed to be unsafe, removed from circulation
  • Any time a stillage is removed from circulation, it should be reported to the relevant supervisor
  • Damaged or unsafe stillages are to be returned to Cevol Industries for proper assessment or repair

Operators Guide

Operators are not to exceed any of the design specifications listed above.
Each stillage hired out by Cevol Industries is in a safe usable condition, stenciled with the maximum capacity and stacking height.
Operators are to report any damaged stillage to their supervisor for assessment or return to Cevol Industries.

CEVOLfooter  logo1

Melbourne Victoria (HQ)
229- 231 Governor Rd,
Braeside,Victoria - 3195 Australia
P: 1800 643 911
E: salesvic@cevol.com.au
Contact: Phil Nish - 0408 958 935

Sydney NSW
56-58 Power St,
St Marys, NSW - 2760 Australia.
P: 1800 643 911
E: salesnsw@cevol.com.au
Contact: Jodie Brown - 0407 839 775

Brisbane QLD
37-43 MacBarry Place,
Rocklea, Qld - 4106 Australia.
P: 1800 643 911
E: salesqld@cevol.com.au
Contact: Quinton Thrussell - 0448 448 099

Perth WA
5 Hanwell Way,
Bassendean, WA - 6054, Australia.
P: 1800 643 911
E: saleswa@cevol.com.au
Contact: Jodie Brown - 0407 839 775  

Australian Made

Cevol Industries have been the leaders in materials handling, pallet and stillage hire in Australia for over 40 years

Website by:
Made with